Table of Content
- Projector 7500 Lumens 1080P LED Mini WiFi Video Home Theater Cinema Projectors
- ANSI Lumens DLP Projector 3D HD HDMI 1080p for Home Theater Cinema w/bundle
- BOBLOV 3D Active Shutter Glasses DLP-Link USB Rechargeable for Home Theater
- Optoma HD142X 1080p 3000 Lumens 3D DLP Home Theater Projector - $599 (PATCHOGUE)
- Home Theater Projector 1080p Optoma HD20 - $250 (Louisville)
- Lumen 4k Projector 1080P 3D LED WiFi Video Home Theater Cinema w/ Speaker
He tested products in his garage and reviewed them them as he installed them in custom homes. The goal was to give people easy access to quality information about car audio and electronics and tech so that you don't have to spend hours researching something like a home theater projector. Today he's still assembling lists, testing products and writes articles along with the few members of HouseholdAudio's experts that he trusts. Apart from being the founder of HouseholdAudio, he's the primary editor and contributor of CarAudioNow.com as well. The Optoma HD142X home theater projector is one of the most affordable models available today. It has 1080p resolution and 3000 Lumens of brightness, as well as support for 3D.

Also, if the room temperature gets into the 80's, the fan speed increases and noise becomes quite noticeable. Although brightness uniformity was a modest 70%, brightness differences across the image were unnoticeable for video projections except for a few instances when the bottom third of the scene was dark. The HD142X weighs only 5.2 pounds and measures 9 x 11.7 x 3.7 inches. The sleek black design is passable, although admittedly it looks like it’s made from cheaper material than its higher-end counterparts. Lastly, if you’re into using a lot of ports, this unit has only two HDMI 1.4/MHL ports, a USB power port, one audio out and a 3D-sync slot. The 70% brightness uniformity is adequate for an entry-level home theater projector.
Projector 7500 Lumens 1080P LED Mini WiFi Video Home Theater Cinema Projectors
The optical design dictates that in most cases a ceiling mount will be the ideal solution. Lamps generally lose about 25% of their brightness after 500 hours of usage. If you want to maintain roughly the same image brightness for longer than 500 hours, one approach is to run your projector in Eco mode from day one, and after about 500 hours, switch to normal brightness. This should increase the brightness level back to what you saw originally for perhaps another few thousand hours, and your overall brightness perception will be close to the same level for the entire time span. Still have box, remote and all original manuals.

Packed with a great number of features but retailing for less than $1,000, this unit is practically a steal. In any of the preset modes, fan noise from the HD142X is fairly low and in the middle frequency range. At the high altitude setting (above 5,000'), fan noise increases substantially, and sitting within ten feet of the HD142X might be distracting.
ANSI Lumens DLP Projector 3D HD HDMI 1080p for Home Theater Cinema w/bundle
This means that greys that should be visible are made black instead. I've tried for hours to adjust this but to no avail. What is strange is that in 3D mode Black Clipping is very minimal.

Its superb brightness is something the Optoma brand is known for – even at a mere 7 to 10 feet projection distance, the images look great, making it one of the best for its price range. The 3D performance isn’t as amazing, but still pretty good, with up to 144 Hz in 3D mode. However, if you are a gamer, the HD142X may not be your best option. It has a 60 Hz refresh rate, and the response time isn’t as fantastic, but it’s passable if you want to experience gaming through a huge projection screen. While this projector isn’t revolutionary, it’s certainly going to give you more than your money’s worth as it gets the job done. Even though there is a User mode on the HD142X where specific preferred settings can be stored, each of the five preset picture modes can be adjusted independently which effectively creates five additional User modes.
BOBLOV 3D Active Shutter Glasses DLP-Link USB Rechargeable for Home Theater
If you see the ad, it is available.This Optoma 1080P DLP Home Theater projector is like new. I am the original owner, and it has been gently used in a smoke, and pet-free home.It is 1300 Lumens of brightnessIt has a bright, sharp, vivid image, with incr ... The HD142X's internal 10-watt speaker is loud enough, but above the 50% volume setting it lacks definition and sounds a bit muddy. Of course, most higher performance home theater projectors have no on-board audio at all, and compared to those the audio on the HD142X is outstanding. If you're doing a surround sound system in your theater as you should, the audio limitations on this unit are irrelevant.

It is the same projector as the HD66, with slightly different packaging. I have refurbished this one to present a bright, clear, colorful ... The audio quality of our test unit's internal 10-watt speaker was disappointing.
Proyector Optoma
Needs to review the security of your connection before proceeding. Delivery times may vary, especially during peak periods. Not usually a big deal these days since many home theater models have omitted traditional analog inputs, but if you happen to have a beloved VCR that you just can't let go of, it won't interface to the HD142X.

Picture definitely "Pops" even in a lit room. Where this projector shines is in the 3D mode. However, watching regular movies there is a lot of Black Clipping.
Normal Eco reduced brightness in all preset modes by 20%, but the Dynamic Black mode was image content sensitive and varied lamp brightness according to the brightness levels in the scenes being projected. Eco mode reduced fan noise substantially, but Dynamic Black mode had no such effect. The HD142X also offers ISF settings in the picture mode menu once an ISF calibration has been completed. An ISF calibration will dial in the "best" picture quality by technical standards that the projector can produce. However, quite often users find that they prefer calibrations that deviate from these standards since the projector is capable of producing more "pop" than it does when set to ideal calibrations. In any event, an ISF calibration is a significant investment on top of the price of the HD142X itself, so many users who are buying the HD42X due to its very attractive entry level price will probably not bother with it.
Within each mode, brightness, contrast, saturation, tint, color temperature, and sharpness can be adjusted. The video image from the HD142X was clear, sharp from edge to edge and top to bottom, and noise free. Cinema mode rendered very natural flesh tones, and after a slight boost in contrast and a reduction in brightness, highlight and shadow detail were well-defined.